Lone Worker Alarms, Panic Alarms, Deaf Fire Alarms Page 5.

A. Wall transmitter When the button is pressed, a signal is transmitted. The unit is battery powered; typical battery life is 3-5 years. Ideal for locations where different people may be present, but who may need to summon assistance. B. Lone worker transmitter It can be carried in a pocket, or worn in the carrying pouch (supplied). It features buttons, which allow a worker to call for help, and it also features a tilt switch, which automatically triggers an alarm should the worker collapse, or be injured. The pull-cord is a security feature, which may be clipped to a belt, and should the unit be forcibly removed, an alarm will be triggered. This is primarily aimed at individuals such as security guards. The unit is battery powered; typical battery life is 3-5 years. C. Wrist transmitter This is ideal for individuals who need a discreet and convenient device. Fully waterproof, a single press of the button will ensure assistance is quickly on its way. D. Pendant transmitter Again, portable and waterproof, this unit has a slightly longer range than the wrist transmitter. The unit is battery powered; typical battery life is 3-5 years. E. Pocket Pager Worn by a member of staff to receive the transmitted messages, with an audio and vibrate function. F. Central Receiver The unit may be a four-channel or eight channel device. This means it is capable of supporting four or eight different transmitters (A-D). It is also possible to specify an 8-channel receiver with an integral paging transmitter (E). A siren/strobe can be connected to the system, which is ideal for raising the alarm in a noisy environment. An autodialler is available for the system. This device is pre-programmed with one or more phone numbers (may be internal, external or mobile). A voice message is recorded into the dialler, giving the location where assistance is required. In the event of a subsequent alarm, the dialler contacts all the numbers stored within it, and delivers the voice message. This is widely used in circumstances where a worker may be alone in a building, and help must be summoned from outside. There is the option of a delay on the operation of either/or the siren and autodialler from when the alarm is raised. In the event that no landline is available for the dialler, a GSM autodialler is available which can make external phone calls using mobile telephone technology. Signal Repeater (not shown) In large buildings, or heavily constructed areas where signal penetration is poor, it may be necessary to add repeaters into the system to ensure the signal reaches the central receiver. These devices are placed around the building, forming a network which ensures total coverage.

TECHNICAL DETAILS CLOSE X

Lone Worker Alarm The workerSentry is ideal for use in warehouses and factories where lone working is carried out. Very simple to install, and with comprehensive backup from our team who not only designed the equipment, but also configure and despatch it, this system has proved very effective to help lone workers carry out their duties safely.

CLOSE X

LeisureSentry Alarm The leisureSentry is ideal for use in swimming pools and leisure centres, where you need to monitor a situation, and summon help from all available staff quickly. The leisureSentry system is designed to help protect staff and patrons as well as provide a means of raising an alarm within the centre. A system comprises of one or more transmitters either carried or worn by the lifeguards, or fixed wall buttons at poolside and gym locations which when activated, send an alarm signal back to a central receiver. The central receiver is a wall-mounted unit, featuring a number of indicators, a sounder and a reset button. Upon receiving an alarm signal, the corresponding indicator illuminates, and the sounder starts. The alarm is cancelled when the reset button on the central receiver is pressed. The receiver also comes with an option of onsite paging to give an instant alert to all managers as well as activating any number of siren/strobe units. As with all our products, because they are wireless, you can install them without the need for huge amounts of costly rewiring.

Emergency Call Point

CLOSE X Waterproof Push Buttons Siren and Flashing Light Available Manager Alert System No Contracts Easy Install

121 Sentry Panic Alarm The 121Sentry is ideal for use by staff who are dealing with members of the public on a one to one basis. Wireless panic buttons can be either carried by the member of staff, or put in fixed, (often concealed under desk) locations. A central receiver is alerted when the button is pressed, and this then gives the location identity of the button that was pressed. This gives staff the re-assurance that any uncomfortable situations can be defused quickly and safely by the intervention of colleague.

CLOSE X

Alarms for Buildings Panic Alarm The 121Sentry is ideal for use by staff who are dealing with members of the public on a one to one basis. This gives staff the re-assurance that any uncomfortable situations can be defused quickly and safely by the intervention of colleague.

Emergency Alarm The workerSentry is ideal for use in buildings where lone working is carried out, entry doors need monitoring and panic alarms are required. Messages are sent to staff with pagers, to summon help, or just to be made aware of events. Staff Attack and location systems can also be installed to ensure that help can be despatched to people in previously unknown locations

Deaf Fire Alarm To help protect your staff who are hard of hearing or deaf. The deafSentry connects up to your existing fire panel, and automatically broadcasts out to pagers worn, that both vibrate, and display a message. In this manner you can alert staff and meet your DDA obligations

CLOSE X

Pool Alarm This system will give you and your clients the confidence to use your pool and leisure facilities knowing help can be quickly on hand, if required, for any reason. When the button is pushed it activates both the external siren and the internal transmitter. The Button will remain depressed and the siren will sound, until a key is used to release the button, alerting those in the location of a problem. Simultaneously the transmitter sends a pre-set code or message to the pocket "pager" up to 250 metres away, subject to local topography. The "pager" will respond by bleeping or vibrating, alerting you that the pool alarm has been activated while displaying the identity number or location of the alarm unit activated. You can have numerous dedicated "pagers" to react to the same alert, so many people can respond to a signal. Additional equipment such as passive infrared motion detectors, (PIRs), can be added to the system at a later date to expand on the safety and security of your site. There is a fully waterproof wrist strap call button available as well. As with all our products, because they are wireless, you can install them without the need for huge amounts of costly rewiring.

CLOSE X Fully Waterproof Up to 250 metre Range Unlimited 'Pagers' No Contracts Expandable System No Wiring Required